Digital audio processor

260

  • Model: 260

260.jpg

MetInfo enterprise content manager system | MetInfo CMS

MetInfo enterprise content manager system | MetInfo CMS

MetInfo enterprise content manager system | MetInfo CMS


MetInfo enterprise content manager system | MetInfo CMS


260 Digital Audio Processor:

The 260 digital audio processor has two sets of inputs and six sets of outputs. The front ends of the two sets of inputs include 28-band graphic equalization and a total of 2.7 seconds of digital delay resources.

120A sub-harmonic synthesizer

2×3, 2×4, 2×5, 2×6 crossover combination selection

Stereo multi-band parametric equalizer

Stereo output limiter

Speaker fine-tuning delay

Pink noise generator

Auto-EQ automatic room equalization compensation

Setup Wizard (Setup Navigation Wizard) function of JBL speakers and Crown amplifier

25 kinds factory presets/25 kinds user setting program memory banks

2 groups input, 6 groups output

RTA-M real-time spectrum analysis and microphone input are set on the panel, with phantom power

24-Bit A/D converter provides a dynamic range greater than 110dB

dbx patented Type IVTMA/D conversion circuit

Graphic LCD display

Technical index

Analog input: Input quantity: (1 group) RTA microphone input

(2 groups) line input

Category: electronic balance/RF filter, XLR female

Impedance: >40kΩ

Maximum input level: +20dBu

Common mode rejection ratio: >45dB

RTA microphone phantom power supply: +15VDC

RTA microphone equivalent input noise: <-110dBu, 22Hz, -22kHz, 150Ω

Analog output:

Number of outputs: (6 groups) line output

Category: electronic balance/RF filter, XLR male

Impedance: 120Ω

Maximum output level: +20dBu

A/D characteristics: Category: dbx Type IV conversion

Dynamic range: 110dB A weighting, 107dB no weighting

Type IV dynamic range: 123dB, including transient signal, A-weighted, 22kHz BW

121dB, including transient signal, no weighting, 22kHz BW

115dB, including program signal, A weighting, 22kHz BW

Sampling frequency: 48kHz

A/D characteristics:

Dynamic range: 112dB A weighting, 110dB no weighting

System characteristics:

Dynamic range: >110dB no weighting, >107dB A weighting

THD+ noise: 0.002%, +4dBu, 1kHz, 0dB input gain

Frequency response: 20Hz-20kHz, ±0.5dB

Channel crosstalk: <-110dB, generally 120dB

Input to output crosstalk: <-110dB

Delay: 10ms per output channel (60ms total)


MetInfo enterprise content manager system | MetInfo CMS